| Viewing 1 - 23 of 23 Items:
|
 |
RTD High Performance Fine-Tip Penetration Probe, 2 3/4"
Model Number: 112HP |
RTD High Performance Fine-Tip Penetration Probe for foods and other soft substances. |
|
|
RTD HP Heavy-Duty Piercing Probe, 4 -1/2" Shank
Model Number: 114HP |
114HP RTD High Performance Heavy-Duty Piercing Probe for plastic melts, rubber, asphalt, frozen foods, or other semi-solids. |
|
|
HP Spring-Articulated Straight Surface Probe 4.25"
Model Number: 121HP |
121HP Spring-Articulated Straight Surface Probes for molds, dies, platens, electronics, machine housings and all other surfaces. |
|
|
HP Spring-Articulated Straight Surface Probe, 12"
Model Number: 121HP-12 |
High Performance RTD Spring-Articulated Straight Surface Probes, 12" Shank, for molds, dies, platens, electronics, machine housings, and all other surfaces. |
|
|
HP Spring-Articulated Straight Surface Probe, 18"
Model Number: 121HP-18 |
High Performance RTD Spring-Articulated Straight Surface Probes, 18" Shank, for molds, dies, platens, electronics, machine housings, and all other surfaces. |
|
|
RTD HP Right Angle Fast Surface Probe
Model Number: 123HP |
123HP Right Angle Fast Surface Probe with low-profile rigid 90°bend. |
|
|
RTD HP Rigid Shank Fast Surface Probe
Model Number: 124HP |
124HP RTD Rigid Shank Fast Surface Probe, 4" shank length. |
|
|
RTD HP 45°Spring Articulated Surface Probe
Model Number: 145HP |
RTD High Performance 45° Spring Articulated Surface Probe for molds, dies, platens, electronics, machine housings and all other surfaces. |
|
|
RTD HP Bolt-On Surface Probe
Model Number: 155HP |
RTD High Performance Bolt-On Surface Probe, for permanent installation. Used to monitor engine or reactor surface temperatures. |
|
|
RTD HP Patch Surface Probe
Model Number: 165HP |
RTD High Performance Patch Surface Probe with thin fiberglass-encapsulated sensor. |
|
|
RTD HP Self-Adhesive Surface Probe
Model Number: 172HP |
RTD High Performance Self-Adhesive Surface Probe, with Polymer-encased sensor |
|
|
201HP General Purpose Immersion Probe
Model Number: 201HP |
201HP General Purpose Immersion Probe for liquids, foods and semi-solids. |
|
|
RTD HP Sensitive Immersion Probe
Model Number: 202HP |
RTD High Performance Sensitive Immersion Probe with low mass. |
|
|
RTD HP Teflon-Coated Immersion Probe
Model Number: 203HP |
RTD High Performance Teflon-Coated Immersion Probe for use where corrosives and metallic contamination are a concern. |
|
|
RTD HP Paddle Probe
Model Number: 204CTHP |
RTD High Performance Paddle Probe for crystallization and fluid temperatures while agitating liquids. |
|
|
RTD HP 12" Long-Reach Immersion Probe
Model Number: 204HP |
RTD High Performance Long-Reach Immersion Probe with 12" shank. |
|
|
RTD HP Heavy-Duty Immersion Probe, 8" Shank
Model Number: 205HP |
RTD High Performance Heavy-Duty Immersion Probe for solder baths, liquids, granular materials, and gas. |
|
|
RTD HP Heavy-Duty Immersion Probe, 12" Shank
Model Number: 205HP-12 |
RTD High Performance Heavy-Duty Immersion Probe for solder baths, liquids, granular materials, and gas. |
|
|
RTD HP Heavy-Duty Immersion Probe, 18" Shank
Model Number: 205HP-18 |
RTD High Performance Heavy-Duty Immersion Probe for solder baths, liquids, granular materials, and gas. |
|
|
RTD HP Heavy-Duty Immersion Probe, 24" Shank
Model Number: 205HP-24 |
RTD High Performance Heavy-Duty Immersion Probe for solder baths, liquids, granular materials, and gas. |
|
|
RTD HP Fully Immersible Probe with No Handle
Model Number: 212HP |
RTD High Performance Fully Immersible Probe with No Handle for plating baths, dipping solutions, brewing vats, storage vats and tanks. |
|
|
RTD HP Air/Gas Probe, Shielded Tip
Model Number: 302HP |
RTD High Performance Air/Gas Probe with perforated shield to induce good velocity and to prevent radiation errors. |
|
|
RTD HP Miniature Air/Gas probe, Shielded Tip
Model Number: 305HP |
RTD High Performance Miniature Air/Gas Probe with small diameter shield and 4.5" shank. |
|
| Viewing 1 - 23 of 23 Items:
|
